This PhDworkVanBergeijk_202202_11_OvertoppingFlow_readme.txt file was generated on 20220216 by Vera van Bergeijk ------------------- GENERAL INFORMATION ------------------- Title of Dataset: PhDworkVanBergeijk_202202_11_OvertoppingFlow Author Information Principal Investigator: Vera van Bergeijk, University of Twente, v.m.vanbergeijk@utwente.nl Associate or Co-investigator: Jord Warmink, University of Twente, j.j.warmink@utwente.nl Alternate Contact(s): Suzanne Hulscher, University of Twente, s.j.m.h.hulscher@utwente.nl Date of data collection : 20171001 - 20220211 Geographic location of data collection: Enschede, The Netherlands Information about funding sources or sponsorship that supported the collection of the data: This work is part of the research programme All-Risk, Implementation of new risk standards in the Dutch flood protection program (P15-21), which is (partly) financed by the Netherlands Organisation for Scientific Research (NWO). Additionally, this work was funded by Rijkswaterstaat and funded by the Interreg 2 Seas program 2014-2020, co-funded by the European Regional Development Fund with contract number 2S07-023. This work was carried out on the Dutch national e-infrastructure with the support of SURF Cooperative. -------------------------- SHARING/ACCESS INFORMATION -------------------------- Licenses/restrictions placed on the data, or limitations of reuse: no restrictions, please use proper reference to the publications Citation for and links to publications that cite or use the data: Paper 1: Van Bergeijk, V. M., Warmink, J. J., Van Gent, M. R. A., Hulscher, S. J. M. H. (2019). An analytical model of wave overtopping flow velocities on dike crests and landward slopes. Coastal Engineering, 149, 28-38. DOI 10.1016/j.coastaleng.2019.03.001 Paper 2: Van Bergeijk, V. M., Warmink, J.J., Hulscher, S.J.M.H. (2020). Modelling the Wave Overtopping Flow over the Crest and the Landward Slope of Grass-Covered Flood Defences. Journal of Marine Science and Engineering. 8, 489. DOI 10.3390/jmse8070489 Paper 3: Van Bergeijk, V. M., Verdonk, V.A., Warmink, J.J., Hulscher, S.J.M.H. (2021). The Cross-Dike Failure Probability by Wave Overtopping over Grass-Covered and Damaged Dikes. Water, 13, 690. DOI 10.3390/w13050690 Paper 4: Van Bergeijk, V. M., Warmink, J. J., Hulscher, S. J. M. H. (2022). The wave overtopping load on landward slopes of grass-covered flood defences: deriving practical formulations using a numerical model. Coastal Engineering, 171, 104047.DOI 10.1016/j.coastaleng.2021.104047 Paper 5: Van Bergeijk, V. M., Warmink, J. J., Hulscher, S. J. M. H. (Submitted). The effects of transitions in cover type and height on the wave overtopping load on grass-covered flood defences. -------------------- DATA & FILE OVERVIEW -------------------- This dataset includes the model output and the matlab scripts used for the 5 journal publications of my PhD work and are structured accordingly. - Paper1_FormulasFlowVelocity - Paper2_ValidationOF - Paper3_Pf - Paper4_LoadFormulations - Paper5_Transitions Each paper folder contains a folder with Figures, Latex_Files (manuscript in latex), MatlabScripts and Output. In the output folder, the postprocessed model data can be found that is necessary to reproduce the figures. Additionally, the papers related to the OpenFOAM model (P2, P4 and P5) contain the empty OpenFOAM folders for every run used in the paper. Next to the paper folders, the dataset contains a folder for AnalyticalModel, AndereOutput, Data and OpenFOAM. - AnalyticalModel: contains general scripts of the analytical Grass-Erosion Model to calculate the erosion depth during a storm. This folder also contains calculations for two case studies: the Afsluitdijk and Millingen a/d Rijn. - AndereOutput: contains other output such as photos, posters, presentations and reports. This folder also contains output related to the All-Risk project. - Data: contains the data of previous measurements/experiments used for the validation of the model. - OpenFOAM: This folder contains all output related to the OpenFOAM model that was not used in the papers. For example, information related to the TU Delft openfoam course and the WEM workshop, all postprocess matlab scripts and case studies of the HedwigePolder, Afsluitdijk and slope instabilities.